Routing Services |
|
Complex Enterprise Network Frameworks, Architectures, and Models |
|
00:15:00 |
|
Creating, Documenting, and Executing an Implementation Plan |
|
00:09:00 |
|
Overview of IP Routing |
|
00:12:00 |
|
Demo 1 – RIPNG |
|
00:26:00 |
Configuring the Enhanced Interior Gateway Routing Protocol |
|
Understanding EIGRP Terminology and Operation |
|
00:14:00 |
|
Planning EIGRP Routing Implementations |
|
00:03:00 |
|
Configuring and Verifying EIGRP |
|
00:03:00 |
|
Demo 1 – Enable EIGRP Routing |
|
00:01:00 |
|
Demo 2 – Define EIGRP Networks |
|
00:03:00 |
|
Demo 3 – Define Bandwidth on Interfaces |
|
00:01:00 |
|
Demo 4 – Enable and Disable EIGRP Automatic Summarization |
|
00:01:00 |
|
Demo 5 – Passive Interface |
|
00:02:00 |
|
Demo 6 – IP Default Network |
|
00:03:00 |
|
Demo 7 – Configure a Router to Advertise a Default Route as the Gateway |
|
00:02:00 |
|
Demo 8 – Example of the IP Route Next Hop Command |
|
00:01:00 |
|
Demo 9 – Example of the IP Route Quad Zero Command |
|
00:01:00 |
|
Demo 10 – Summarization in Discontiguous Networks |
|
00:01:00 |
|
Configuring and Verifying EIGRP in an Enterprise WAN |
|
00:03:00 |
|
Demo 1 – Disabling Automatic Summarization |
|
00:01:00 |
|
Demo 2 – Frame Relay Using Dynamic Mapping |
|
00:03:00 |
|
Demo 3 – EIGRP over Layer 3 MPLS VPNs |
|
00:02:00 |
|
Demo 4 – EIGRP over Layer 2 MPLS VPNs |
|
00:04:00 |
|
Configuring and Verifying EIGRP Authentication |
|
00:04:00 |
|
Demo 1 – Configure Authentication Mode for EIGRP |
|
00:02:00 |
|
Demo 2 – Configure the Key Chain |
|
00:01:00 |
|
Optimizing EIGRP Implementations |
|
00:05:00 |
|
Demo 1 – Enable Authentication to use the Key Chain |
|
00:01:00 |
|
Demo 2 – EIGRP |
|
00:21:00 |
Configuring the Open Shortest Path First Protocol |
|
Understanding OSPF Terminology and Operation |
|
00:20:00 |
|
OSPF Packets |
|
00:11:00 |
|
Planning OSPF Routing Implementations |
|
00:06:00 |
|
Basic OSPF Verification and Configuration |
|
00:09:00 |
|
Demo 1 – Configuring Single Area OSPF |
|
00:02:00 |
|
Demo 2 – Configuring Multi Area OSPF |
|
00:01:00 |
|
Demo 3 – Verifying OSPF |
|
00:02:00 |
|
OSPF Network Types |
|
00:11:00 |
|
Demo 1 – Assigning Router Priority |
|
00:02:00 |
|
Demo 2 – Override the Default Interface Cost |
|
00:01:00 |
|
Demo 3 – Configure a Key for Simple Authentication |
|
00:01:00 |
|
Demo 4 – Configure the MD5 Key-ID and Key |
|
00:02:00 |
|
Demo 5 – Verifying Simple Password Authentication |
|
00:01:00 |
|
Demo 6 – OSPF |
|
00:19:00 |
Manipulating Routing Updates |
|
Assessing Network Routing Performance Issues |
|
00:05:00 |
|
Using Multiple Routing Protocols on a Network |
|
00:09:00 |
|
Demo 1 – Redistribution Supports All Routing Protocols |
|
00:01:00 |
|
Implementing Route Redistribution |
|
00:07:00 |
|
Demo 1 – Redistribute Routes into RIP |
|
00:03:00 |
|
Demo 2 – Redistribute Routes into OSPF |
|
00:04:00 |
|
Demo 3 – Default Metric for Routing Protocols |
|
00:02:00 |
|
Demo 4 – Redistributing Routes into EIGRP |
|
00:05:00 |
|
Demo 5 – Applying Metric Values for EIGRP |
|
00:03:00 |
|
Demo 6 – Modifying the Administrative Distance for all Routing Protocols |
|
00:06:00 |
|
Demo 7 – Changing OSPF AD |
|
00:15:00 |
|
Controlling Routing Update Traffic |
|
00:11:00 |
|
Demo 1 – Route Map |
|
00:10:00 |
|
Demo 2 – Using Distribute Lists and Filter Incoming Routing Updates |
|
00:03:00 |
|
Demo 3 – Defining a Filter for Outgoing Routing Commands |
|
00:02:00 |
|
Demo 4 – Distribute List In or Out and Examples |
|
00:06:00 |
|
Demo 5 – Distribute Lists to Avoid Route Feedback |
|
00:05:00 |
|
Demo 6 – Fallbacks of Distribute Lists |
|
00:01:00 |
|
Demo 7 – Using Prefix Lists |
|
00:02:00 |
Implementing Path Control |
|
Understanding Path Control |
|
00:05:00 |
|
Demo 1 – Similarities of ACLs and Prefix Lists |
|
00:01:00 |
|
Implementing Path Control using Offset-Lists |
|
00:02:00 |
|
Demo 1 – Configuring a Prefix List |
|
00:04:00 |
|
Demo 2 – Implementing Path Control Using Offset-Lists |
|
00:03:00 |
|
Demo 3 – Verify Offset-Lists |
|
00:01:00 |
|
Implementing Path Control using IOS IP SLAs |
|
00:10:00 |
|
Demo 1 – Cisco IOS IP SLAs |
|
00:01:00 |
|
Demo 2 – IP SLAs Applications |
|
00:00:00 |
|
Demo 3 – Operations – Responders and Sources |
|
00:01:00 |
|
Demo 4 – IP SLAs Operations |
|
00:01:00 |
|
Demo 5 – Steps to Deploying IP SLAs |
|
00:01:00 |
|
Demo 6 – IP SLA – ICMP ECHO and ICMP ECHO Sub Commands |
|
00:04:00 |
|
Demo 7 – IP SLA Schedules |
|
00:05:00 |
|
Define Tracking Objects to Track the State of IP SLAs Operations |
|
00:02:00 |
|
Demo 9 – Configuring Track Delay |
|
00:01:00 |
|
Demo 10 – Configure a Static Route for IP SLAs Tracking |
|
00:03:00 |
|
Demo 11 – Verify IP SLAs using Method 1 |
|
00:02:00 |
|
Demo 12 – Verify IP SLAs using Method 2 |
|
00:02:00 |
|
Implement Path Control using Policy-Based Routing |
|
00:09:00 |
|
Demo 1 – Implement Path Control using Policy-Based Routing |
|
00:01:00 |
|
Demo 2 – Configure PBR |
|
00:01:00 |
|
Demo 3 – Logical PBR Operation |
|
00:01:00 |
|
Demo 4 – Route-Map Commands for PBR |
|
00:03:00 |
|
Demo 5 – Match Statements and Conditions |
|
00:03:00 |
|
Demo 6 – Match Commands Used in PBR |
|
00:01:00 |
|
Demo 7 – Specify Criteria to be Matched using Prefix Lists of ACLs |
|
00:01:00 |
|
Demo 8 – Specify Criteria to be Matched by Packet Length |
|
00:01:00 |
|
Demo 9 – Modify Matching Conditions using Set Statements |
|
00:01:00 |
|
Demo 10 – Set Conditions |
|
00:03:00 |
|
ROUTE Course 5 Topic D – Demo 11 – Set Commands used in PBR |
|
00:02:00 |
|
Demo 12 – Specify the Next Hop IP Address for Matching Packets |
|
00:01:00 |
|
Demo 13 – Specify Interfaces Through which Packets Can be Routed |
|
00:01:00 |
|
Demo 14 – Specify a List of Default Next-Hop IP Addresses |
|
00:02:00 |
|
Demo 15 – Specify a List of Default Interfaces |
|
00:02:00 |
|
Demo 16 – Mark Packets Using the IP ToS Field |
|
00:02:00 |
|
Demo 17 – Set the 3 IP Precedence Bits in the IP Packet Header |
|
00:01:00 |
|
Demo 18 – Set IP Precedence Parameters |
|
00:02:00 |
|
Demo 19 – Identify a Route Map to Use for Policy Routing on an Interface |
|
00:01:00 |
|
Demo 20 – Various Methods to Verify PBR |
|
00:02:00 |
|
Advanced Path Control Tools |
|
00:02:00 |
Implementing a Border Gateway Protocol Solution for ISP Connectivity |
|
BGP Terminology, Concepts, and Operation |
|
00:20:00 |
|
Demo 1 – EGP and IGP |
|
00:01:00 |
|
Demo 2 – AS |
|
00:02:00 |
|
Demo 3 – IANA |
|
00:01:00 |
|
Demo 4 – RIRs |
|
00:02:00 |
|
Demo 5 – AS Numbers |
|
00:03:00 |
|
Demo 6 – Facts about BGP |
|
00:03:00 |
|
Demo 7 – BGP Neighbors |
|
00:03:00 |
|
Demo 8 – BGP Operational Overview |
|
00:02:00 |
|
Demo 9 – BGP Use between ASs |
|
00:01:00 |
|
Demo 10 – BGP and IGPs |
|
00:01:00 |
|
Demo 11 – Connecting Enterprise Networks to Internet Service P |
|
00:02:00 |
|
Configuring BGP |
|
00:12:00 |
|
Demo 1 – Questions for Deploying Routing and Connection |
|
00:02:00 |
|
Demo 2 – Public IP Address Space |
|
00:02:00 |
|
Demo 3 – Configure Static Routes |
|
00:02:00 |
|
Demo 4 – Configure the Default Local Preference |
|
00:01:00 |
|
Demo 5 – Define BGP as the IP Routing Protocol |
|
00:03:00 |
|
Demo 6 – Router BGP Command Parameters |
|
00:01:00 |
|
Demo 7 – Identify Peer Router to Establish a BGP Session |
|
00:02:00 |
|
Demo 8 – Create a Peer Group |
|
00:02:00 |
|
Demo 9 – Assign Neighbors as Part of the Peer Group |
|
00:02:00 |
|
Demo 10 – Disable an Existing BGP Neighbor or Peer Group Relat |
|
00:02:00 |
|
Demo 11 – Establish the IBGP Session Using a Loopback Interfac |
|
00:02:00 |
|
Demo 12 – IBGP Source IP |
|
00:03:00 |
|
Demo 13 – Increase the TTL for EBGP Connections |
|
00:03:00 |
|
Demo 14 – Configure the Router as the Next Hop for a BGP Speak |
|
00:02:00 |
|
Verifying and Troubleshooting BGP |
|
00:01:00 |
|
Basic BGP Path Manipulation Using Route Maps |
|
00:05:00 |
|
Filtering BGP Routing Updates |
|
00:02:00 |
Implementing Routing Facilities for Branch Offices and Mobile Workers |
|
Planning the Branch Office Implementation |
|
00:15:00 |
|
Demo 1 – NAT |
|
00:09:00 |
|
Planning for Mobile Worker Implementations |
|
00:03:00 |
|
Routing Traffic to the Mobile Worker |
|
00:02:00 |
Implementing IPv6 in the Enterprise Network |
|
Introducing IPv6 |
|
00:07:00 |
|
Configuring and Verifying IPv6 Unicast Addresses |
|
00:06:00 |
|
Routing IPv6 Traffic |
|
00:01:00 |
|
Configuring Static Routing |
|
00:04:00 |
|
Configuring OSPFv3 |
|
00:07:00 |
|
Demo 1 – OSPFv3 |
|
00:22:00 |
|
Configuring EIGRP for IPv6 |
|
00:03:00 |
|
Demo 1 – EIGRP for IPv6 |
|
00:18:00 |
|
Multiprotocol BGP (MP-BGP) |
|
00:03:00 |
Mock Exam |
|
Mock Exam – Cisco CCNP Implementing Cisco IP Routing (Route) v2.0 Online Training Course |
|
00:20:00 |
Final Exam |
|
Final Exam – Cisco CCNP Implementing Cisco IP Routing (Route) v2.0 Online Training Course |
|
00:20:00 |